2022 United USH-8.526TR70

8.5 X 26 - Wide Body, Cast Aluminum Corner, Tag Flat Top, Triple Axle
Height
48 IN Extra Height
11ft. Interior height
Axle
3 EA 7000 # Elec Brake Axle (6" drop) # 13 A
22 1/2 deg up (6" drop)
Triple Spread Axles: 5" inch spread between axles
Triple spread axles: 5" inch spread between axles with the wheelbox size of 116" inch
Tires
6 EA ST235/85 R 16 LRE Goodyear Endurance on Black and Silver Margay Alum Wheel
Hitch
7-Way Molded Plug
Breakaway kit w/charger
Coupler - 25,000 # bolt on coupler
Jack - 7000# Drop Leg, Removable
Square, Drop Leg w/ Pin, Removable
2 EA Safety Chain
Tongue - 3rd Member
Tongue- 1 ft ext w/3rd member/1/4 tube
1 foot ext w/ 3rd member / 1/4 wall tube
Frame
3 EA Backer required for 14" inch scene light
2 EA Backer required for 14" inch scene light
2 EA Battery box recessed, 16in. x 10in. x 12in. deep
Battery box recessed in floor, 16in. x 10in. x 12in.
Beavertail
1 PAIR Corner posts - 4" inch corner posts
Crossmembers - 16in oc
NOTE: This trailer has 16in center cross members
Fish plating the outer 8in I beam 4ft x 7.25in x 3/16" fish plate of I beam
4ft. x 7.25in. x 3/16in. thick plate, 4ft. forward and 4ft. rearward of axle center on both R/S and C/S of trailer for
8in. I beam trailers.
Fish plate the plate to I beam.
Frame - Rear Wing
Frame - Steel Straps
Strap Sidewalls
8 EA Heavy Duty - D Rings
I- Beam - 8" inch I Beam Frame - double beam
Lift- Note the lift comes with only standard ramps
These ramps are 36" inch or three feet long.
4 FT Platform - Car Deck / Storage
2" tube - Location: Start 3ft. 11in. From Front and Go Forward, set bottom of platform at 78in. AFF
FINISH UNDERSIDE WITH SAME MATERIAL AS CEILING
With 3/4" plywood on top of deck AND BLACK RUBBER COIN
Roof Bows - 12in On Center
NOTE: This trailer has 12in center roof bows.
1 PAIR Skid rollers 4 1/2" - Mount on Rear
Weld to frame
Spare Tire Well in Floor
Titan Lift - 16 ft 4-post standard duty
16ft. lift 6000# 4-post lift standard duty
26 PTL Wall - Nascar Hatposts - 16" O. C.
Interior
Floor - 3/4in Plywood Floor
Misc Interior
Cover last 6in. of rolled coin floor with .080 smooth aluminum
.080 smooth alum- in step well, int. rear corner covers, last 6in.of floor
Use .080 Aluminum in step well, use for rear corner covers, and last 6in. of floor
PTL Box off sidewalls to reduce dust
Ceiling -- White Vinyl Ceiling
COVE TRIM
WHERE CEILING MEETS THE WALLS & BOX IN RAMP SPRINGS
COLOR: Flat Black
D-Rings Heavy Duty - Bolt in
These D-rings are bolted in and rated at 5000# use carriage bolts - Heavy duty, Location: (2) 1ft. From Rear,
(2) 18ft. From Rear, (2) 2ft. 5in. From Front, 46in. Apart, See Print (1) / (2) On platform 12in. from each wall
and 12in. from front
39 PTL Floor - Raised Small Coin Black
Raised small coin flooring - Black - Floor, ramp door and platform,
26 PTL Wall - Carpeting (marine grade) on wall 36" tall
.024 WHITE ALUMINUM OVER 3/8" PLYWOOD
12 Volt Electrical
2 EA Battery - 12V Deep Cycle w/ Box
Hook to 7 way cord to recharge, Location of battery: Inside Recessed battery Compartments
Diode - to work with the 14in. Nova Angled Scene Lights
Diode to be hooked to the Nova lights so they can be used as back up lights.
LED CLEARANCE & TAIL LIGHTS FOR ENTIRE UNIT
3 EA LED-14in. angled Scene light (Nova)
Surface mounted angled Scene light: Location: On rear header 12in. above ramp door
2 EA LED-14in. angled Scene light (Nova)
Surface mounted angled Scene light: Location: (2) on CS Spaced Evenly
1 PAIR Lights - LED Back -up (Docking) light
w/ chrome cover flush mounted light, Part# E96-WS00-1
7 EA Lights - LED recessed Clearance Lights (EXTRA)
Location: (5) RS: (3) High and (2) Low, (4) CS: (3) High and (1) Low
3 PAIR Lights - LED Surface mount tail w/chrome ring
Extra set LED tail light surface mounted w/ chrome ring - EXTRA SET OF 3 LIGHTS ABOVE RAMP DOOR
O